drain cleaner device

Sink cleaner device is a good domestic helper. this product has long service-life, safe and reliable.

drain cleaner device

Operation:

1,One hand holding the handle, loosen the stop spin screws , so that the steel wire can free expand .2,Pull out steel wire then inserted into the mouth of pipe , in case of difficult stretching into or not, then the wire tighten the stop spin screws to the pipe outlet from the 8-10 cm (the sleeve of the roots to the pipe outlet), the hand of shake the handle to the pipe put some pressure, on the other hand clockwise turn away, steel wire access, and release stop spin screw ,using this way up into the obstruction.3,When moving the plate feel slightly heavier , it will be filling the full water in the pipe, the object can be crushed . (Blending of water that washed away after crused, drain cleaner ) , in case of objects do not broken mix, that is put out steel wire and clockwise turn away at the same time, you can hitch out the unbroken object, drain cleaner completed .

4,After used, the dirty steel wire will be pull out and rinse with water, dry it and on the steel wire coated oil or cooking oil, then push the wire into dial in the future use.

 

Special circumstances Remedy:1,Fall into the pipeline in case of special materials, such as a toothbrush, chopsticks, spoon and so on. used a small soft cloth or cotton waste with the wire inserted into the pipe, mixing live with a soft cloth can be copied up.2,In case of not extend into the wire and could not be pulled out

 (such as hitch iron sewing, etc.) don’t force to fragment, should short the wire and tighten the stop spin screws , counter-clockwise move the disk, you can pull it out.3,In case of wire hitch objects in the middle of unfortunate fall, pull out the wire, repeat the exercise with the method until the hitch out.

Update Date:2011-6-22 04:47:55

drain cleaner device